 > Products > Lubricating Oil Test > HK-5921A VPC Gas Phase Coking Tester

HK-5921A VPC Gas Phase Coking Tester

Brand : HK
Product origin : China
Delivery time : within 30 days after recieving full TT payment
Supply capacity : 100set/month

The VPC Gas Phase Coking Tester complies with the requirements of test standards including GJB 1263A Appendix D, SAE ARP5921, and the VPC Gas Phase Coking Evaluation Method. It is suitable for evaluating the coking tendency of ester-type synthetic aviation lubricating oils under the mixed state of air and oil phases, so as to simulate the condition of ventilation pipes in bearing chambers. When conducting airworthiness verification on the performance of turbine lubricating oils, it is necessary to measure the tendency of the mixture of their vapor and air to generate harmful carbon deposits on the surface of hot-end components such as engine ventilation pipes through high-temperature oxidation or thermal cracking reactions under high-temperature immersion conditions. The Civil Aviation Administration of China (CAAC) technical standard "Civil Aircraft Engine Lubricating Oils" (CTS0-2C704) clearly stipulates that turbine lubricating oils must undergo a gas phase coking test to determine the tendency of lubricating oils to form carbon deposits in the high-temperature ventilation pipe area of aviation turbine engines without oil immersion. It is required to report the deposition amount in the measuring tube, as well as the 40℃ kinematic viscosity change rate and acid value change of the lubricating oil before and after the test. Combining standard methods, foreign prototype research and standard investigation, our company has independently developed, designed and produced the VPC Gas Phase Coking Tester, which meets the method requirements of this test and is the only manufacturer of this product in China.

Overview

The VPC Gas Phase Coking Tester complies with the requirements of test standards including GJB 1263A Appendix D, SAE ARP5921, and the VPC Gas Phase Coking Evaluation Method. It is suitable for evaluating the coking tendency of ester-type synthetic aviation lubricating oils under the mixed state of air and oil phases, so as to simulate the condition of ventilation pipes in bearing chambers.When conducting airworthiness verification on the performance of turbine lubricating oils, it is necessary to measure the tendency of the mixture of their vapor and air to generate harmful carbon deposits on the surface of hot-end components such as engine ventilation pipes through high-temperature oxidation or thermal cracking reactions under high-temperature immersion conditions. The Civil Aviation Administration of China (CAAC) technical standard "Civil Aircraft Engine Lubricating Oils" (CTS0-2C704) clearly stipulates that turbine lubricating oils must undergo a gas phase coking test to determine the tendency of lubricating oils to form carbon deposits in the high-temperature ventilation pipe area of aviation turbine engines without oil immersion. It is required to report the deposition amount in the measuring tube, as well as the 40℃ kinematic viscosity change rate and acid value change of the lubricating oil before and after the test.Combining standard methods, foreign prototype research and standard investigation, our company has independently developed, designed and produced the VPC Gas Phase Coking Tester, which meets the method requirements of this test and is the only manufacturer of this product in China.

Features

1. The instrument consists of an oil heating module, a test tube heating module, an automatic data collection and calculation module, an automatic control module, an air purification module, and a flow control module.2. The instrument automatically records the temperature at each temperature point according to time, no manual monitoring and recording are required.3. Key components of the instrument are imported to ensure product stability.4. The instrument automatically times and stops heating and air supply after 18 hours.5. The instrument is equipped with a professionally designed pipe cutting saw, which can safely and conveniently complete the section pipe cutting step.

Technical Parameters

1. Power Supply: AC 220V±10% 50Hz2. Power: 2200W3. Oil Heating Method: Heating jacket automatic heating4. Test Tube Heating Method: Metal bath heating5. Constant Temperature Accuracy: ±1℃6. Flow Rate: (765±5)ml/min7. Environmental Requirements: Temperature 5～40℃; Humidity ≤85%

Packaging & Shipping

1 How to deliver?

We can send by Express or by Air. Also we have best transportation solution for DHL, FEDEX, UPS,TNT faster and cheaper

2 What if it broken during transport?

Please do not worry, we do standard export package.

We have 12 months warranty, if it broken during transport, we can change a new one for you. If it is broken after 12 months, we can supply you a new one at a cost price.

VPC

Gas Phase Coking Tester

FAQ

1. Why choose us?

Low price:

We are end manufacturer instead of trader or dealer, saving a lot of medium cost, cutting the prices factually and saving money for customers.

High quality:

Our company focuses on product quality. We equip professional research and development team.

Good service:

We could provide product catalog and user manual to customer during inquiry stage. We will offer the installation and operation video, debug video and maintaining videoto our customer before Ex-work. Following link is the video address which is for our previous customer:

https://www.youtube.com/channel/UC4NDJI_tKsJIuaixCMDQF4w

We offer fast delivery and secure packing. We provide one year guarantee and long term spare parts supply at cost price.

2. How can I choose the suitable one?

We design and manufacture our testers based on ASTM, IP, ISO standards, so user may tell the exact standard or test method to us, and then we can offer our solution.

3. How can I pay?

We accept many payment terms, such as T/T, L/C, Western Union, PayPal, and money gram and so on.

4. When I receive it after pay?

Normally, we have testers in our stock, if not, we can deliver within 5-7 days, please contact us to check transport time and charge to your address.

5. What should I do if I do not know how to use?

Please do not worry, manual user will be sent together, also we can offer Operation and installation video, you can also contact us with more technological support.

6. What should I do if some parts broken?

Please do not worry, we have 12 months warranty except accessories, you can also buy parts from us after 12months.

7. Can I order OEM/ ODM services?

YES, product can be customized.